 |
Holiday
Hours
Pacific
Wireless will close to celebrate the 4th of
July holiday Monday and Tuesday, July 3rd
and 4th. Normal business hours will resume
Wednesday, July 5th at 8:00am MST. |
|
Pacwireless
900MHz Antenna Line
Don't let
this happen to you! |
In
recent months, the 900MHz frequency has been hoppin'! As a
manufacturer, it's difficult to keep a specific stock level
on the shelf for all products. However, in response to the
recent surge in demand for 900MHz products, Pacific Wireless
has ramped up its production of Yagis, HPOL omnis and VPOL
omnis in addition to releasing into production new grids,
RooTennas and sectors for the 900MHz antenna line. It is
highly recommended that our resellers take advantage of this
opportunity to stock up on these antennas. Pacific Wireless
will happily submit sales leads to our resellers and offer
referrals to customers who come calling for product.
Resellers who stock product are the most likely to receive
these leads!
Currently available for immediate shipping:
- ODH9-9: 9dBi HPOL Omnidirectional Antenna
Contact
Us about new pricing for the ODH9-9!
- YA9 Series: 9, 11 & 13dBi Yagi Antennas
- OD9 Series: 5, 6, 8 & 11dBi Omnidirectional
Antennas
In production:
- GD9 Series: 15 & 18dBi Grid Dish Antennas
- SA9-120-13: 13dBi 120deg VPOL Sector Antenna
- RT9: 12dBi 900MHz RooTenna
- SAH9-120-12: 12dBi 120deg HPOL Sector Antenna
New
Releases
The
following products are nearing completion. Contact
Us for more information about these products or to place
your pre-orders!
- 4.9GHz 11dBi VPOL Omnidirectional - Online
Now!
- High gain 5GHz RooTenna?
- Die Cast Enclosure Accessories including hinged cover
and built-in antenna
- 2.4GHz 45 and 60 Degree Sectors
- 4.9GHz 16dBi 90 Degree Wideband Sector
|
|
Power
Over Ethernet:
Active Splitter with Isolation
The active POE Splitter from Pacific Wireless gives
"carrier class" performance in a low cost
system. With its IEEE 802.3af compatibility and
advanced auto-sensing algorithm it will accept POE
power from any IEEE 802.3af router or power supply.
The overload and short circuit protection will shut
down power immediately when a short circuit is
detected without any damage to the POE system. Power
(36 to 60V) is expected on ethernet pins 4/5 (V+)
and 7/8 (V-) as per the IEEE 802.3af standard or
pins 1,2,3,6 (Cisco Standard).
Using power over Ethernet to power remote devices
has several advantages including:
- The power supply can be centrally located
where it can be attached to an uninterruptible
power supply.
- Power can be supplied over long distances, up
to 300 feet.
- Power can be available wherever network access
is available
- The user has the ability to easily power on
reset the attached equipment from a remote
location.
The Active POE Splitter from Pacific Wireless can be
used by the original equipment manufacturer to
supply power to remote equipment and devices without
the expense of building in separate POE
functionality into their equipment.
These devices are a good fit for the industrial
market for sensing and remote video applications.
? Read
the Data Sheet
|
|
